Safe for a Lifetime, Unsafe for a Short Time

Most of the time, a structure is analysed in its final completed form, when slabs are connected, frames are closed and stability systems are fully functional. However, a building cannot be built in a day.

At some point, the structural system may not yet be fully developed. A newly cast slab may need temporary props for support. A partially erected steel frame may look terrifyingly unstable before its bracing is installed. Concrete may not have gained sufficient strength to carry the intended loads.


𝘓𝘪𝘷𝘦 𝘪𝘯 𝘵𝘩𝘦 𝘔𝘰𝘮𝘦𝘯𝘵

One of the most important ideas in construction-stage behaviour is that loads respond to the structure available at that moment.

Consider a newly cast slab supported by shores resting on the floor below. These shores transfer the weight of fresh concrete through concentrated reactions to the supporting floor. Where several floors are connected by shores and reshores, construction loads may be shared between them.

When the shores are removed, the load path changes again as the slab takes on loads previously carried by the shores.

The same happens during steel erection. Before the permanent stability system becomes effective, temporary braces may be essential to keeping the frame stable.

A cantilevered working platform may also be installed to receive crane-lifted materials or provide access for façade works, introducing different kind of loads into the supporting structure.



𝘞𝘩𝘢𝘵 𝘋𝘰𝘦𝘴𝘯’𝘵 𝘒𝘪𝘭𝘭 𝘠𝘰𝘶 𝘔𝘢𝘬𝘦𝘴 𝘠𝘰𝘶 𝘚𝘵𝘳𝘰𝘯𝘨𝘦𝘳

Temporary works may support an incomplete structural system, such as shores and braces, or facilitate construction activities, such as working platforms and walkways.

Either way, they can introduce temporary loads or alter the structural load path.

A structure that is perfectly safe upon completion may therefore experience its most demanding condition long before the final floor is finished.

After all, the structure must survive construction before it can serve its intended purpose.


𝘐𝘯𝘵𝘦𝘨𝘳𝘢𝘵𝘦 𝘒𝘯𝘰𝘸𝘭𝘦𝘥𝘨𝘦 𝘪𝘯𝘵𝘰 𝘠𝘰𝘶𝘳 𝘗𝘳𝘰𝘧𝘦𝘴𝘴𝘪𝘰𝘯𝘢𝘭 𝘞𝘰𝘳𝘬𝘧𝘭𝘰𝘸

Our Engineer’s Cheat Sheet — Construction-Stage Risk Logic condenses the key risk triggers, assumption traps and decision rules into a one-page reference for reviewing construction-stage structural risks.






0 Comments